[OSL | CCIE_Voice] UCM Locations vs RSVP

[datucha123 datucha123]

Hello,

I have a question about the CAC:

Imagine that we are asked to configure the UCM standard Locations CAC
between HQ, BR1 and BR2 Sites in the following way (this is just an example)

BR1  to BR2  -  allow up to 10 calls

BR2  to HQ  -  allow up to 5 calls.

Well if using UCM Standard Locations that quite easy, and it will work
fine.

But when the requirements is to use the RSVP CAC to acomplish that, I think
there is a little problem:

Well, first of all the HQ Route is terminating both Sites PVC's (maybe I am
wrong, and traffic from BR2 to BR1 does not go through HQ Router, but
through FR Switch directly). So based on that I think the configuration has
to be the following:

On BR2 Serial Interface  -  ip rsvp bandwidth <equivalent to 10 calls>
(actual value does not mean in this case)
On BR1 Serail Interface  - ip rsvp bandwidth <equivalent to 10 calls>
On HQ Router to BR1 Serial interface -  ip rsvp bandwidth <equivalent to 10
calls>
On HQ Router to BR2 Serial Interface  -  and here comes the problem: if I
configure 10 calls equivalent value for "ip rsvp bandwidth" then up to 10
calls will be permitted from BR2 to HQ (whereas only 5 has to be
permitted), and if I configure 5 calls equivalent value, then the BR2 to
BR1 will also have only 5 calls.

Can you please help my to get the idea for such situation?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120112/7bee9ae6/attachment.html>