[OSL | CCIE_Voice] problems getting SIP phone registered to BR2

Adam Thompson phoenix at fatturtle.com
Sat Jul 10 15:07:52 EDT 2010


I am assuming you are only having a problem with the one SIP phone. Was this
phone once registered to this CME as SCCP? When the phone displays "Phone
Unprovisioned", check the firmware on the phone, does it say it successfully
downloaded the SIP firmware, or does it still say SCCP?

According to other posts, this has worked:

1). Shutdown the port to which phone was connected
2). No create cnf
3). No create profile
4). Create profile
5). Reload the router
6). No shut the interface

The only other thing I can see is that the voice register pool 2
configuration does not specify a phone type.

I had a similar problem with one of my phones and the only way I could get
it to register to CUCME was to register it to CUCM first. I don't know if it
was just the phone acting up because my other phones registered with CME
using SIP without any problems

HTH
Adam

On Sat, Jul 10, 2010 at 2:49 PM, CCIE Voice <cciev at corb.net> wrote:

> Hi Adam:
>
> Thanks and yes I do have the phone along with a DN build for it.  My phone
> is setup as voice register pool 2.   Config follows:
>
> voice register global
>  mode cme
>  source-address 10.10.202.1 port 5060
>  max-dn 2
>  max-pool 2
>  load 7960-7940 P0S3-08-9-00
>  authenticate register
>  time-format 24
>  date-format D/M/Y
>  tftp-path flash:
>  create profile sync 0015222555275483
>  ntp-server 10.10.100.2 mode directedbroadcast
> !
> voice register dn  1
>  number 3005
>  name br2 phn 3
> !
> voice register dn  2
>  number 3006
>  name br2 phn 4
> !
> voice register template  1
>  dialplan 1
>  no conference enable
> !
> voice register dialplan  1
>  type 7940-7960-others
>  pattern 1 3...
>  pattern 2 999
> !
> voice register pool  1
>  id mac 001B.D4C6.C139
>  type 7960
>  number 1 dn 1
>  template 1
>  dtmf-relay sip-notify
>  username 3005 password cisco
>  description 32143005
>  codec g711ulaw
> !
> voice register pool  2
>
> BR2-RTR#term no mon
> BR2-RTR#sh run | beg voice register
> voice register global
>  mode cme
>  source-address 10.10.202.1 port 5060
>  max-dn 2
>  max-pool 2
>  load 7960-7940 P0S3-08-9-00
>  authenticate register
>  time-format 24
>  date-format D/M/Y
>  tftp-path flash:
>  create profile sync 0015222555275483
>  ntp-server 10.10.100.2 mode directedbroadcast
> !
> voice register dn  1
>  number 3005
>  name br2 phn 3
> !
> voice register dn  2
>  number 3006
>  name br2 phn 4
> !
> voice register template  1
>  dialplan 1
>  no conference enable
> !
> voice register dialplan  1
>  type 7940-7960-others
>  pattern 1 3...
>  pattern 2 999
> !
> voice register pool  1
>  id mac 001B.D4C6.C139
>  type 7960
>  number 1 dn 1
>  template 1
>  dtmf-relay sip-notify
>  username 3005 password cisco
>  description 32143005
>  codec g711ulaw
> !
> voice register pool  2
>  id mac 000C.851C.E88B
>  number 1 dn 2
>  template 1
>  dtmf-relay sip-notify
>  username 3006 password cisco
>  description 32143006
>  codec g711ulaw
>
>
>
> On Sat, Jul 10, 2010 at 12:31 PM, Adam Thompson <phoenix at fatturtle.com>wrote:
>
>> Do you have this phone configured in your CME? SIP phones need a DN
>> configured in order to register.
>>
>> -Adam
>>
>> On Sat, Jul 10, 2010 at 1:41 PM, CCIE Voice <cciev at corb.net> wrote:
>>
>>> Hello All:
>>>
>>> I am having troubles getting a SIP phone registered to the BR2 gateway.
>>>
>>> The phone will boot up in SIP code to the point where it says "Phone
>>> Unprovisioned" on the phone itself.  I can get past this by adding this line
>>> to the gateway:
>>>
>>> tftp-server flash:SIP000C851CE88B.cnf
>>>
>>> Although I do not think I should have to add this line for the phone to
>>> find it's config file.  Am I wrong about that?
>>>
>>> After I add this line, the phone does in fact find the
>>> flash:SIP000C851CE88B.cnf file but it seems to go into a boot loop at that
>>> point an displays a "Resetting" message before rebooting each time.
>>>
>>> This is an extract of the "debug tftp-server" for the phone while it is
>>> rebooting:
>>>
>>> Jul 10 21:40:17.267: TFTP: Looking for SIP000C851CE88B.cnf
>>> Jul 10 21:40:17.271: TFTP: Opened flash:SIP000C851CE88B.cnf, fd 7, size
>>> 1238 for process 346
>>> Jul 10 21:40:17.543: TFTP: Finished flash:SIP000C851CE88B.cnf, time
>>> 00:00:00 for process 346
>>> BR2-RTR#
>>> Jul 10 21:40:32.071: TFTP: Looking for CTLSEP000C851CE88B.tlv
>>> Jul 10 21:40:32.175: TFTP: Looking for SEP000C851CE88B.cnf.xml
>>> Jul 10 21:40:32.283: TFTP: Looking for SIP000C851CE88B.cnf
>>> Jul 10 21:40:32.287: TFTP: Opened flash:SIP000C851CE88B.cnf, fd 7, size
>>> 1238 for process 346
>>> Jul 10 21:40:32.555: TFTP: Finished flash:SIP000C851CE88B.cnf, time
>>> 00:00:00 for process 346
>>> Jul 10 21:40:32.599: TFTP: Looking for SIPDefault.cnf
>>> Jul 10 21:40:32.603: TFTP: Opened flash:/SIPDefault.cnf, fd 7, size 1890
>>> for process 346
>>> Jul 10 21:40:32.963: TFTP: Finished flash:/SIPDefault.cnf, time 00:00:00
>>> for process 346
>>> Jul 10 21:40:33.011: TFTP: Looking for P0S3-08-9-00.loads
>>> BR2-RTR#
>>> Jul 10 21:40:33.015: TFTP: Opened
>>> flash:PHONE/7940-7960/P0S3-08-9-00.loads, fd 7, size 459 for process 346
>>> Jul 10 21:40:33.111: TFTP: Finished
>>> flash:PHONE/7940-7960/P0S3-08-9-00.loads, time 00:00:00 for process 346
>>> BR2-RTR#
>>> Jul 10 21:40:45.659: TFTP: Looking for CTLSEP001BD4C6C02D.tlv
>>> Jul 10 21:40:45.727: TFTP: Looking for SEP001BD4C6C02D.cnf.xml
>>> Jul 10 21:40:45.779: TFTP: Looking for SIPDefault.cnf
>>> Jul 10 21:40:45.783: TFTP: Opened flash:/SIPDefault.cnf, fd 7, size 1890
>>> for process 346
>>> Jul 10 21:40:45.811: TFTP: Looking for XMLDefault.cnf.xml
>>> Jul 10 21:40:46.931: TFTP: Finished flash:/SIPDefault.cnf, time 00:00:01
>>> for process 346
>>> Jul 10 21:40:46.931: TFTP: Looking for SIP000C851CE88B.cnf
>>> Jul 10 21:40:46.939: TFTP: Opened flash:SIP000C851CE88B.cnf, fd 7, size
>>> 1238 for process 350
>>> Jul 10 21:40:47.111: TFTP: Opened system:/its/XMLDefault.cnf.xml, fd 8,
>>> size 2725 for process 349
>>> Jul 10 21:40:47.131: TFTP: Finished system:/its/XMLDefault.cnf.xml, time
>>> 00:00:00 for process 349
>>> Jul 10 21:40:47.275: %IPPHONE-6-REG_ALARM: 24: Name=SEP001BD4C6C02D
>>> Load=8.0(5.0) Last=Phone-Reg-Rej
>>> BR2-RTR#
>>> Jul 10 21:40:47.299: TFTP: Finished flash:SIP000C851CE88B.cnf, time
>>> 00:00:00 for process 350
>>> BR2-RTR#
>>>
>>>
>>> Then the phone reboots....
>>>
>>>
>>> What am I missing?
>>>
>>> Thanks in advance...scd
>>>
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>>
>>
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20100710/af4be81a/attachment-0002.html>


More information about the CCIE_Voice mailing list